Vancouver, British Columbia -
Newsfile Corp.
- May 20, 2026 - Founders Metals Inc. (TSXV: FDR) (OTCQX: FDMIF) (FSE:
9DL0) ("Founders" or the "Company") reports results from its deep auger
drilling program at the Maria Geralda target within the Antino Gold
Project ("Antino" or the "Project") in southeastern Suriname (Figure 1).
The 37-hole deep auger program has identified a coherent, high-grade
gold shoot - a concentrated zone of mineralization within a larger 600 m
drill-defined gold-bearing structure - directly coincident with the
Company's previously reported diamond drill intercept of 22.5 metres (m)
of 11.88 grams per tonne (g/t) gold (Au) in hole MG003 (
announced June 24, 2025).
Highlights
- - High-grade deep auger intercepts in core of gold zone including:
-
30.0 m of 4.64 g/t Au (MGAD041)
-
12.0 m of 10.57 g/t Au (MGAD059)
-
14.0 m of 7.52 g/t Au (MGAD056)
-
15.0 m of 4.83 g/t Au (MGAD055)
- - Additional significant deep auger intercepts include:
-
16.0 m of 4.35 g/t Au (MGAD043)
-
18.0 m of 3.56 g/t Au (MGAD057)
-
20.0 m of 2.88 g/t Au (MGAD058)
-
13.0 m of 3.68 g/t Au (MGAD049)
- - Target remains open at depth with 20 deep auger holes ending in mineralization at the 30 m auger limit
-
- New auger data defines shoot orientation, plunge direction, and
dimensions, providing a precise targeting framework for follow-up
diamond drilling down plunge into untested bedrock
-
- Directly applicable to other Emerging Targets including Van Gogh, Da Vinci, and Parbo
-
- The Company plans to expand the auger grid to test a potential second shoot followed by diamond drilling in early Q4 2026
Colin Padget, President & CEO, commented, "This deep
auger program has delivered exactly what it was designed to do - provide
a three-dimensional picture of how high-grade gold is organized within
the Maria Geralda system. The results show that the nearly 12 g/t Au
interval over 22.5 m in MG003 is not an isolated occurrence but sits
within a geometrically coherent, plunging high-grade zone. Understanding
this geometry is critical for targeting across Antino - it tells us
where to drill and, just as importantly, where not to drill. The zone
plunges steeply to the west-southwest within a structure that our
diamond drilling has shown carries gold over more than a kilometre of
strike. This style of high-grade shoot within an extensive structural
host is a well-recognized geometry in orogenic gold systems, and we look
forward to testing this shoot into bedrock with our next phase of
diamond drilling in early Q4."
The auger data defines a plunging shoot within a west-dipping structural
host. The upper contact of the mineralized zone strikes north-south and
dips approximately 36° to the west, deepening from 10 m in the
northeast to 28 m in the southwest. The highest-grade gold plunges more
steeply at 56-60° toward the west-southwest within this envelope -
meaning grades intensify with depth. The shoot footprint at the ≥1.0 g/t
Au cutoff measures 18 m along-plunge × 9 m along-strike with a stable
2:1 aspect ratio, and cumulative grade curves show no sign of
diminishing at the 30 m auger depth limit. All current mineralization is
in saprolite; the bedrock beneath the shoot has not been tested.
Next Steps
The Company is expanding the auger grid to test five shallow gold
intersections that may represent a second shoot or a near-surface zone
adjacent to the main shoot. Maria Geralda is easily accessible for
diamond drilling from the Company's existing road network, and Founders
aims to return with diamond drills for bedrock follow-up in early Q4
2026.
Figure 1: Maria Geralda Plan Map
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7574/298183_b5d4e536f4b11803_001full.jpg
Figure 2: Maria Geralda Section
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7574/298183_b5d4e536f4b11803_002full.jpg
Table 1: Deep Auger Assay Results
|
Hole ID
|
From (m)
|
To (m)
|
Interval* (m)
|
Au (g/t)
|
|
MGAD059
|
9.0
|
21.0
|
12.0
|
10.57
|
|
MGAD058
|
10.0
|
30.0
|
20.0
|
2.88
|
|
MGAD057
|
11.0
|
29.0
|
18.0
|
3.56
|
|
MGAD056
|
16.0
|
30.0
|
14.0
|
7.52
|
|
MGAD055
|
0.0
|
9.0
|
9.0
|
6.71
|
|
and
|
15.0
|
30.0
|
15.0
|
4.83
|
|
MGAD054
|
16.0
|
30.0
|
14.0
|
0.57
|
|
MGAD053
|
NSA
|
|
MGAD052
|
0.0
|
7.0
|
7.0
|
1.46
|
|
MGAD051
|
NSA
|
|
MGAD050
|
0.0
|
4.0
|
4.0
|
0.67
|
|
and
|
10.0
|
29.0
|
19.0
|
2.38
|
|
MGAD049
|
13.0
|
26.0
|
13.0
|
3.68
|
|
MGAD048
|
13.0
|
30.0
|
17.0
|
2.09
|
|
MGAD047
|
16.0
|
30.0
|
14.0
|
2.63
|
|
MGAD046
|
17.0
|
30.0
|
13.0
|
3.31
|
|
MGAD045
|
22.0
|
30.0
|
8.0
|
1.17
|
|
MGAD044
|
NSA
|
|
MGAD043
|
14.0
|
30.0
|
16.0
|
4.35
|
|
MGAD042
|
11.0
|
29.0
|
18.0
|
0.95
|
|
MGAD041
|
0.0
|
30.0
|
30.0
|
4.64
|
|
MGAD035-040
|
NSA
|
|
MGAD034
|
14.0
|
19.0
|
5.0
|
0.62
|
|
MGAD033
|
NSA
|
|
MGAD032
|
26.0
|
30.0
|
4.0
|
1.19
|
|
MGAD029-031
|
NSA
|
* Intervals are vertical downhole depths in saprolite. True widths
are approximately 80-85%. Intercepts are uncapped and calculated using a
0.10 g/t Au cutoff grade with <5.0 m of internal dilution of zero
grade, and a minimum composite length of 2.0 m. Intervals below 2.0
gram-metres omitted. NSA = no significant assays. Results for
MGAD024-028 were previously reported on February 19, 2026. Deep auger
grid centred at UTM Zone 21 825750, 398225.
About Founders Metals Inc.
Founders Metals Inc. is a Canadian gold exploration company building a
district-scale gold camp in southeastern Suriname. The Company controls a
102,360-hectare contiguous land package in the Guiana Shield - the
largest uninterrupted package of highly prospective greenstone belt
geology in the region. Founders is executing one of the most active
exploration programs in the global junior gold sector and is backed by a
strategic partnership with Gold Fields Limited. The Company is
committed to responsible exploration, strong community engagement, and
disciplined capital allocation as it advances Suriname's next major gold
camp.
ON BEHALF OF THE BOARD OF DIRECTORS,
Per: "Colin Padget"
Colin Padget
President, Chief Executive Officer, and Director
Contact Information
Katie MacKenzie, Vice President, Corporate Development
Tel: +1 306 537 8903 |
katiem@fdrmetals.com
Quality Assurance and Control
Samples were collected at 1 m intervals from vertical auger holes
drilled to 30 m depth in saprolite using a 5" diameter Little Beaver
deep auger. Each interval was homogenized and split: one half was washed
and sieved to retain coarse rock chips for geological logging, and the
other submitted to the laboratory. Samples were submitted to FILAB
Suriname, a Bureau Veritas Certified Laboratory in Paramaribo, Suriname
(a commercial certified laboratory under ISO 9001:2015). Samples are
crushed to 75% passing 2.35 mm screen, riffle split (700 g) and
pulverized to 85% passing 88 µm. Samples were analyzed using a 50 g fire
assay (50 g aliquot) with an Atomic Absorption (AA) finish. For samples
that return assay values over 10.0 grams per tonne (g/t), another cut
was taken from the original pulp and fire assayed with a gravimetric
finish. Founders Metals inserts blanks and certified reference standards
in the sample sequence for quality control. External QA-QC checks are
performed at ALS Global Laboratories (Geochemistry Division) in Lima,
Peru (an ISO/IEC 17025:2017 accredited facility). A secure chain of
custody is maintained in transporting and storing of all samples.
Qualified Persons
The technical content of this news release has been reviewed and
approved by Michael Dufresne, M.Sc., P.Geol., P.Geo., an independent
qualified person as defined by National Instrument 43-101.
Cautionary Statement Regarding Forward-Looking Information
This press release contains "forward-looking information" within the
meaning of applicable Canadian securities legislation, including
statements regarding long-term value creation and the Company's
prospects. Forward-looking information can generally be identified by
words such as "plans", "expects", "is expected", "budget", "scheduled",
"estimates", "forecasts", "intends", "anticipates", "believes", or
variations indicating that certain actions, events or results "may",
"could", "would", "might" or "will" occur or be achieved.
Forward-looking statements are based on management's current
expectations and reasonable assumptions but are subject to business,
market, and economic risks, uncertainties, and contingencies that may
cause actual results to differ materially from those expressed or
implied, including: general business and economic uncertainties;
exploration results; mining industry risks; and other factors described
in the Company's most recent management discussion and analysis.
Although the Company has attempted to identify important factors that
could cause actual results to differ materially, other factors may cause
results not to be as anticipated. There can be no assurance that
forward-looking information will prove accurate, as actual results and
future events could differ materially from those anticipated.
Accordingly, readers should not place undue reliance on forward-looking
information. The Company does not undertake to update any
forward-looking information except in accordance with applicable
securities laws. Neither TSX Venture Exchange nor its Regulation
Services Provider (as that term is defined in policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.
All material information on Founders Metals can be found at
www.sedarplus.ca.